PS Off to use those same paddles <G> Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Isaac OLEG" <oleg-i@noos.fr> To: "College and University Technicians" <caut@ptg.org> Sent: Tuesday, May 25, 2004 10:21 AM Subject: RE: mini belts > > Ping Pong paddle ? are these Chinese technical tricks ? > > Is not it heavier than any filing setup ? > > Isaac OLEG > > > -----Message d'origine----- > De : caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]De la part de > Ron > Koval > Envoyé : lundi 24 mai 2004 20:44 > À : caut@ptg.org > Objet : mini belts > > > Lance, > > Thanks for posting this. I'd seen over the years all sorts of sanding > paddles, but never thought of using a ping pong paddle. I had an old > one in > the basement, and gave it a try.... WOW! It helped me to square off > the > sides and top to make it more rectangular, and shorten the handle, but > for > the rough work, it really speeds things up. And less potentially > damaging > than the Dremel sanding barrel. > > Ron Koval > Chicagoland > > > > > > Wim, just my experience. I have one, but, I now slip wood under the > shanks of upright or block up tails on grands and use a ping pong > paddle > to do the two side facets or rough initial stuff with about 40-60 > grit, > then refine with strips. This actually faster for me. I just never > went back to the belt. > > Lance Lafargue, RPT > LAFARGUE PIANOS > New Orleans Chapter, PTG > 985.72P.IANO > llafargue@charter.net > > _________________________________________________________________ > Is your PC infected? Get a FREE online computer virus scan from > McAfee® > Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives > > > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC