Hi Bob, Look at the side edges of the key cover, perhaps there will be a metal strip attached with two screws. The player grand I saw had a set-up like this. The metal strip fit into a slot routed into the edge of the key cover. Sincerely, David At 10:35 PM 12/8/2005, you wrote: >Caut List, > >I encountered a 1926 Steinway grand yesterday that >used to be a player and I could not get the fall board >off. It was not attached to the cheek blocks but >seems only to rest on a pin on each side. <snip> >Any advice on removing this fall board would be >welcome. > > >Bob Hull
This PTG archive page provided courtesy of Moy Piano Service, LLC