This is a multipart message in MIME format ---------------------- multipart/alternative attachment Ken, The original was by the late, great Newton Hunt. His post is on= the archives in the CAUT section. Probably been talked about on= Pianotech also...check the archives for more info... "All hard wood. =09Newton P.S. You could build a box of 3/8" ply and 1x1" cleats= 15x17x18". It can be turned to the desired seating height. Almost= indestructible, cheap, not worth stealing and extremely strong." David Ilvedson, RPT Original message From: Ken Zahringer To: College and University Technicians Received: Tue, 15 Feb 2005 09:02:59 -0600 Subject: [CAUT] Practice Room Benches A couple of months back, someone talked about having built oblong= boxes for practice room piano benches. They were something like= 17X19X21 inches so they could be rotated to different heights. = I=92m thinking of doing a similar thing here, and our Director= wants some more information on design & usage experience. Would= whoever that was please contact me so I can pick your brain? Thanks, Ken Z. -- Ken Zahringer, RPT Piano Technician University of Missouri School of Music 297 Fine Arts Bldg Columbia, MO 65211 573-882-1202 cell 573-489-7529 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/5d/57/ef/99/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC