---------------------- multipart/alternative attachment I've always used ordinary carpenters Titebond glue for all my hammer hanging, including grands. Wim Willem Blees, RPT Piano Tuner/Technician School of Music University of Alabama Tuscaloosa, AL USA -----Original Message----- From: John Ross <jrpiano@win.eastlink.ca> To: College and University Technicians <caut@ptg.org> Sent: Fri, 15 Jul 2005 10:55:46 -0300 Subject: Re: [CAUT] vertical hammers For those that replace the hammers, in the piano. What glue do you use? I have always used hide glue, which would be inconvenient to use in a customer's home. John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: Don McKechnie To: caut Sent: Friday, July 15, 2005 10:53 AM Subject: RE: [CAUT] vertical hammers A variation on this is to use 1/8" clear acrylic instead of plywood. Push the hammers up to the acrylic sheet and make your marks on the back side of the sheet. I believe I picked up this idea from Wally Brooks some years ago at a convention. Don Subject: RE: [CAUT] vertical hammers From: "Ed Sutton" <ed440@mindspring.com> Date: Thu, 14 Jul 2005 16:04:28 -0400 To: "College and University Technicians" <caut@ptg.org> It can be done well on the bench, thus: -Note blow distance in the piano. -Set up action on the bench in an action cradle. -Attach bolts (about 1/4"x3") through the action bracket slots. -Cut strips of plywood to approximate the string planes, bass and tenor-treble. -Drill holes to attach the plywood to the bolts, use nuts and washers to mount the boards at the blow distance from hammer rest line. -Put masking tape on the boards at strike point line. -Press old hammers against a stamp pad, then press them against the masking tape, printing an index of the string spacing and hammer spacing. -Remove old hammers and replace as in piano. -It is also possible to superglue a support shelf on the boards to assist in maintaining hammer alignment. -If you have lots of pianos of same model, save your index boards for re-use. Ed Sutton ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/31/37/00/97/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC