On 11/11/05 8:34 AM, "Otto Keyes" <okeyes@uidaho.edu> wrote: > Actually the 2 subjects are closely related....For the Wurlitzer, with the > addition of a long handle and an extra large weight on the impact hammer ( > it would now resemble a sledge), extra force could be applied to the > instrument in any way the tech deemed prudent to render the "pinblock" > pliable & take care of the problem permanently. Otto's wisecrack reminds me: I forgot to mention in my post on the topic that I extend my extension (Schaff) hammer a good long way for the best results on the Wurlitzer. I bet the aluminum tube design, with a long shaft, would be even better. Problem is the feel is so strange. In wood, I can feel what the pin is doing. In metal, the sensory feedback is indecipherable. Add that to the additional torque, and it takes all my patience to get through a tuning on that piano. But maximum leverage helps a good bit. Regards, Fred Sturm University of New Mexico
This PTG archive page provided courtesy of Moy Piano Service, LLC