Don, What's the blue thing hooked to the cyclone? Jim Busby -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Donald McKechnie Sent: Friday, December 01, 2006 11:44 AM To: caut at ptg.org Subject: [CAUT] Dust Control Paul, Pictured is my plethora of dust and fume removal devices. Oneida 2 hp dust collector: http://www.oneida-air.com/products/systems/gorilla/gorilla.htm I'll echo Dale here in that Oneida is the place to go. Good and knowledgeable folks to deal with. Just up the road in Syracuse! JDS Air-Tech 2000 http://www.jdstools.com/index.asp?PageAction=VIEWCATS&Category=18 I believe the 750-ER is the replacement for the older 2000 Instead of mounting this to the ceiling, I have it on a dolly so I can get it close to the work site. Light duty dust collector - 1 hp I'm not sure where I purchased this but you can get one from Grizzly. http://www.grizzly.com/products/G1163 This works well in taking it to the work site also but we have it primarily for the buffer. Allegro Blower http://www.allegrosafety.com/html/promotions/index.html This unit works very well in getting rid of fumes but you must have a window that opens or some other means of getting the hose out of the building. Hope all this helps. Don
This PTG archive page provided courtesy of Moy Piano Service, LLC