Hi Jeannie, I had the same problem two years ago. I took the part to a local welder and he was able to repair it like new. It fit perfect when I put it back in the piano. The welder was concerned that the metal would not have enough nickel in it., but it was no problem. Richard On 12/1/06 11:42 PM, "Jeannie Grassi" <jcgrassi at earthlink.net> wrote: > Hello everyone, > When I arrived to tune the Mason & Hamlin BB at the local church for the > gala Christmas event there was a note asking me to adjust the "soft pedal" > since it "slipped out" when they took the piano off the stage. Would that > it were only that simple. The shift lever is broken in two. They hadn't > removed the lyre when they moved it off the stage. (I don't even want to > try to imagine the scenario....) Supply houses no longer carry these; > PianoDisc (Mason & Hamlin) doesn't have them. My only chance is for one of > you out there to part with one that you might have been saving for just such > an emergency. The piano is 1975 vintage; serial number: 79822. If you > think you might have something I can use, please contact me. We'll compare > notes. Thanks much, > jeannie > > > Jeannie Grassi, RPT > Registered Piano Technician > Island Piano Service > Bainbridge Island, WA > 206-842-3721 > mailto:jcgrassi at earthlink.net > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC