[CAUT] snap ring pliers

[Tim Coates]

Here are some pictures of the snap ring pliers.  An auto tool supply 
house should have them.  I used an action model to show them in use.  I 
made a slotted block in order for them to spread properly.   The action 
model actually has the shank/backcheck relationship I prefer   to use, 
even though it doesn't come across in this picture.

Tim Coates



-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010652_1.jpg
Type: image/jpeg
Size: 29166 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20061219/e868808d/attachment-0003.jpg 
-------------- next part --------------




-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010651_1.jpg
Type: image/jpeg
Size: 30075 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20061219/e868808d/attachment-0004.jpg 
-------------- next part --------------

-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010656.jpg
Type: image/jpeg
Size: 67337 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20061219/e868808d/attachment-0005.jpg 
-------------- next part --------------