Jim, At 12:48 PM 2/13/2006, you wrote: >Just a reminder to all about this thread; I'm looking for a way to >improve these 1098s w/o Major work. Something we might all benefit from. Well...the sea wall along the RR tracks across the South end of Salt Lake could use reinforcement.... Sorry...couldn't resist...actually, I think lightening the bridge and/or cutting a trench might have some value. As you note, lots of mass there. Best. Horace >Thanks, > >Jim Busby BYU > > > > >-----Original Message----- >From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of >David Love >Sent: Sunday, February 12, 2006 8:03 AM >To: 'College and University Technicians' >Subject: RE: [CAUT] 1098 slight redesign > >Sounds like the scaling may not be the problem. Seems like board design >is >probably more likely the culprit. What's the bearing measurement down >there. It should be near zero. > > >_______________________________________________ >caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC