[CAUT] Mehaffey Impact Hammer

[Joe And Penny Goss]

Hi David,
Naughty boy, you must have been using it for a hammer <g>
Try grinding the ears off a ring that has the holes in the ends Thats what I
did, and DONT ask. If you can not get the ring on (or cant find the ring
without the holes) any mechanic will have the reverse ring pliers that can
get the ring on for you. It just needs to be the correct thickness to go
easily into the groove and fit tight on the shaft so that it will stay
on.Your calipers will be able to tell the correct size.
Did I say DAMHIK
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "David Severance" <severanc@mail.wsu.edu>
To: "College and University Technicians" <caut@ptg.org>
Sent: Wednesday, February 22, 2006 10:07 AM
Subject: [CAUT] Mehaffey Impact Hammer


> Does anyone know where I can get parts for my Mehaffey Impact Tuning
> Hammer.  Specifically, the retaining ring that holds the head in the
> lever.  Apparently, it is an exotic type because I can't find anything
> locally that will fit.  E rings and snap rings don't seem to
> work.  Suggestions anyone?
>
> David Severance
> Washington State University
>
> _______________________________________________
> caut list info: https://www.moypiano.com/resources/#archives