Lance, You might contact Darrell Fandrich about Estonias. He has some experience with them. Alan -- Alan McCoy, RPT Eastern Washington University amccoy at mail.ewu.edu 509-359-4627 > From: <lafargue at bellsouth.net> > Reply-To: "College and University Technicians <caut at ptg.org>" <caut at ptg.org> > Date: Sat, 08 Jul 2006 18:05:18 -0500 > To: <caut at ptg.org> > Subject: [CAUT] Estonia > > I don't imagine many Universities have Estonia's, but I was wondering if > any of you have worked on them. I have two here and when leveling > strings/hammer fitting, I've noticed that it looks like agraffe holes > are not drilled at exactly the same height, or on same plane (ooo) > , or possibly the agraffe threaded holes in the plate are not vertical > causing the agraffes to lean. I'm having a tough time getting strings > on a level plane. I've not noticed this on many other pianos. Thanks. > > > Lance Lafargue, RPT > > LAFARGUE PIANOS, LTD > > New Orleans Chapter, PTG > > 985.72P.IANO > > lafargue at bellsouth.net > > www.lpianos.com <http://www.lpianos.com/> > > <http://www.lafarguepianos.com/> > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC