[CAUT] RE : key bushings

[Jim Busby]

Greg,

No, everyone doesn't know about the camphor. Thanks for the tip. Does it
in any way seem to affect glue adversely? Is set up time affected?

Thanks.

Jim busby BYU

-----Original Message-----
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of
Greg Granoff
Sent: Tuesday, November 07, 2006 12:08 PM
To: College and University Technicians
Subject: Re: [CAUT] RE : key bushings

It's odd, but among the various objections to hot hide glue that come up
frequently is one against the way it smells, especially if it is "going
off".  Many long years ago, my mentor taught me to put a few drops of
spirit
of camphor--available at any drug store-- say a drop or two per ounce
into
the glue mixture.  This dramatically slows the rotting process, and
additionally gives the glue a very pleasant camphor-y smell--a bit like
what
you smell if you sand old style plastic keytops. Somehow I thought
everyone
knew about this.

Greg Granoff

----- Original Message ----- 
From: "Ron Nossaman" <rnossaman at cox.net>
To: "College and University Technicians" <caut at ptg.org>
Sent: Tuesday, November 07, 2006 8:03 AM
Subject: Re: [CAUT] RE : key bushings


>
> > The trouble I've had with hide glue, aside from the usual like -is
it
> > rotten and stinks? -is it too cold or too hot? - is that it leaves
> > strings behind it and gets all over the place.
>
> With a glue pot designed for working with hide glue, heat
> control is a matter of keeping the pot plugged in. If it
> strings on you, you have it way too thick. Neither is the
> fault of the glue.
>
>
> >And it is quite as
> > capable of sinking into the cloth as white glue, if it's made up too
thin.
> >
> > Susan Kline
>
> Which is why I apply usably thin glue to the wood instead of
> the cloth.
>
> We do whatever works for us, and as long as performance,
> longevity, and future service aren't compromised, it's the
> right way.
> Ron N
>