[CAUT] Piano Garage for Temperature & Humidity Control

Linda Holzer LRHolzer at ualr.edu
Thu Nov 16 18:43:02 MST 2006


Thanks, Chris.  I will call.  I'm especially interested to know about 
dimensions and materials.  After further discussions with the 
architect, it seems likely that rather than buying a pre-fab unit, a 
too-small dressing room & bathroom off-stage will be knocked out and 
the space converted for piano storage.

When you built a piano garage, did you eliminate air vents?  (This 
space that will be converted was originally windowless, so I'm sure 
windows won't be an issue.  But there are vents in there now.)  Did 
you take any special approach to the door?  We're considering a 
garage-style door.   (There is space in the area above this room that 
could accommodate a door that moves vertically.)

So far I haven't found information on a pre fab unit.

Linda Holzer




>I built one and installed several Dampp Chaser Systems which has worked very
>well for ten years. I had a room built in another location which was ten
>times as expensive and doesn't work as well. If you find a pre fab room I'd
>be pleasantly surprised. You can call me at 570.236.9949.
>Chris Solliday
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20061116/4cee8503/attachment.html 


More information about the caut mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC