Jeff You'll find no corrosion on the wire. Corrosion happens when metal is exposed to moisture AND air. So for your experiment to work, dampen the wire with Downy and let it just sit there. But I'm afraid that will not give you the results you're looking for anyway. It's the moisture in the Downey that causes the wire to corrode. Not necessarily the chemicals. Wim Quoting Paul T Williams <pwilliams4 at unlnotes.unl.edu>: > Jeff, > > I just began a new experiment! I took a small piece of 13g wire and > > wrapped it in a piece of cloth soaked in Downy. We'll see by the end > of > the week if anything corrodes, I hope ( or hope not!) > > And fortunately, the piano upstairs with the bad hammers is also > slated > for restringing soon. Never try things out on the concert > instruments, > eh? > > Paul > > > > > Jeff Tanner <jtanner at mozart.sc.edu> > Sent by: caut-bounces at ptg.org > 04/03/2007 12:00 PM > Please respond to > College and University Technicians <caut at ptg.org> > > > To > College and University Technicians <caut at ptg.org> > cc > > Subject > Re: [CAUT] Experiment success! > > > > > > > > On Apr 2, 2007, at 9:24 AM, Paul T Williams wrote: > > The other question arising is whether the chemicals in Downy will be > > corrosive to the strings. > > I believe I remember some discussion (on this list) some time back > about > the Downy being corrosive to wire - especially bass strings? > Jeff > > > Jeff Tanner, RPT > University of South Carolina > > > > Willem Blees, RPT Piano Tuner/Technician School of Music University of Alabama Tuscaloosa, AL USA 205-348-1469
This PTG archive page provided courtesy of Moy Piano Service, LLC