Don, If you could just send us each 10, we would be set for life. I have yet to repair an aluminum rail... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: Don <pianotuna at accesscomm.ca> To: "College and University Technicians" <caut at ptg.org> Received: 1/24/2007 4:00:00 PM Subject: Re: [CAUT] Aluminum hammer rail (Screw hole) repair >Hi Ron, >I have 99 left out of 100 I got some years ago. It worked well. >At 05:14 PM 1/25/2007 -0600, you wrote: >> says they have the next oversize action screw and should go right in. >> Anyone ever get or use them ? >> from Wisconsin >Regards, >Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. >Non calor sed umor est qui nobis incommodat >mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ >3004 Grant Rd. REGINA, SK, S4S 5G7 >306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC