Hi Jim, >Have you tried Paul Revenko Jones' method of agraffe >restoration/shaping? It polishes the holes and makes a better taper >(radius) which doesn't seem to damage as easily. I might take off one >that I did months ago and see if it manifests the same kind of damage as >you expressed. They still have no noise so maybe this "less acute" angle >doesn't fracture as easily. I do this to all agraffes, new or old, and >it seems to minimize the mini glacial thing. (I like that visual) Yes, Paul is doing some good work. We have developed an approach which seems to be quite similar to what Paul is doing. After polishing the inner surface we are EN plating the agraffes and heat treating. The results have been quite good. The piano we took to Rochester last June had agraffes with this work. Ron O. -- OVERS PIANOS - SYDNEY Grand Piano Manufacturers _______________________ Web http://overspianos.com.au mailto:ron at overspianos.com.au _______________________
This PTG archive page provided courtesy of Moy Piano Service, LLC