Hi I have a question about the Bluthner Patent Grand Action. Is there some reason why the front rail should be floating about 3 mm off the keybed ? It actually kind of looks like this was the way the thing was designed. The touch is very light and you dont get any feeling of spring in the keys when you play hard. The shift mechanism is mounted all the way on the left side of the action and pushes just about at the middle of the balance rail. Three dags hold the back rail down... and the front rail simply floats. It takes quite a bit of pressure to push the rail down at any given place. No cheekblock screws of course since these are integrated into the keyframe and move with the action when the shift pedal is engaged. Kind of looks like the front rail is meant to float to facilitate a smoother shift of the action. Anyone know if this is the case or do I have a warped action frame ? If so... its perfectly uniform in warp from bass to treble... Cheers RicB
This PTG archive page provided courtesy of Moy Piano Service, LLC