[CAUT] existing pins

[Jon Page]

>We normally have our movers show up with enough manpower to simply 
>lift them out, and set them back in place.

Isn't it time to set up a winch?  If you have a beam, you have support.
If not, put one in. Mine is attached to a beam and the cable is run out
to a pully which is secured with a large eye bolt.  Pulls 9'ers with 
no problem.

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080814/e86692b1/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winch.jpg
Type: application/octet-stream
Size: 31179 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/caut.php/attachments/20080814/e86692b1/attachment.obj