David, Here are two versions. A small one for the kit. Bigger one for the shop. (The big one has a hole large enough to shove a shank in and the screw cuts a trough for glue release. Multi tool) Each one simply has a screw and a small hole by the screw for the string. Jim ________________________________ From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Monday, February 11, 2008 3:35 PM To: caut at ptg.org; pianotech at ptg.org Subject: [CAUT] hitch pin loop tool I have always duplicated hitchpin loops on single strings with my round needle nose and a vice-grip. It seems to me there was a simple tool using a dowel and a screw? I'm talking about field work here. David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080211/4a3ff266/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: P1010005.JPG Type: image/jpeg Size: 207398 bytes Desc: P1010005.JPG Url : https://www.moypiano.com/ptg/caut.php/attachments/20080211/4a3ff266/attachment-0001.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC