[CAUT] Shank to Hammer weight spreadsheet

[Jon Page]

>   It takes too long.  Just dry fit the hammers to the shanks
>right after you've tapered them with the table saw ...

I don't think you get the idea. Mating a shank's SW with a
hammer weight will require less hammer mass alteration
to achieve a smooth SW curve.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080216/feabfd45/attachment.html