Looks like 33 mm from the top arm to the bottom of the v in the slight bend in the lower arm. Have a look. br Yes! Works well, doesn’t it? Yours has improvements over mine. What are the actual dimensions you came up with? Jim -------------------------------------------------------------------------------- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Barbara Richmond Sent: Friday, March 21, 2008 1:39 PM To: College and University Technicians Subject: [CAUT] {CAUT] Schwander "balancier spring neutralizer" Hey Jim (& Jurgen), Thanks for the great idea. I just got a set of wippens to repin which needed the jig. This is my version inspired by Jim Busby's. It works beautifully--with the extra little bends, there is less slipping. Thanks so much for the timely tip! Barbara Richmond, RPT happily pinning away near Peoria, IL -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080321/14558718/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: Jig 026.jpg Type: image/jpeg Size: 91877 bytes Desc: not available Url : https://www.moypiano.com/ptg/caut.php/attachments/20080321/14558718/attachment-0002.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: Jig 025.jpg Type: image/jpeg Size: 96406 bytes Desc: not available Url : https://www.moypiano.com/ptg/caut.php/attachments/20080321/14558718/attachment-0003.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC