[CAUT] 3/4" front rail cloth punchings

[Paul T Williams]

Please remind me where I can order some? I think I'll just use the 3/4's 
on some icky practice room uprights!

Thanks
Paul




Jim Busby <jim_busby at byu.edu> 
Sent by: caut-bounces at ptg.org
05/19/2008 01:47 PM
Please respond to
College and University Technicians <caut at ptg.org>


To
College and University Technicians <caut at ptg.org>
cc

Subject
Re: [CAUT] 3/4" front rail cloth punchings






Paul, 
 
No matter what the set it is/was, I’d consider replacing it with the 
“Crescendo” punchings. (Wertzen felt. Way better.) The testing committee 
is now specifying these for action models in testing. We replace them and 
pianists say how much better the touch is. 
 
Regards,
Jim Busby BYU
 

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul 
T Williams
Sent: Monday, May 19, 2008 7:30 AM
To: College and University Technicians
Subject: [CAUT] 3/4" front rail cloth punchings
 

Hi all, 

I, by accident, ordered some sets of front rail cloth punchings but 
received 3/4" diameter.  I might want to send them back, but I was 
wondering if there is a huge difference in the feel over the 1" dia. 
punchings?  I assume the 3/4" dia.  are for uprights, but aren't upright 
keys' widths pretty close to the same as grands?  I know there are slight 
variances from make to make be their original design of the width from the 
width of the whole keyframe.  3/4 would probably be required for 7/8th 
size keyboards, but why do they really make two sizes? 

Thanks for your ever-ending wisdom :>) 

Paul

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080520/0c346646/attachment.html