[CAUT] lubing ponder

[Jeff Tanner]

In some situations I have dusted the inside of the bushings with teflon powder, and stayed with the same pin with very good results.
Jeff
  ----- Original Message ----- 
  From: G Cousins 
  To: CAUT 
  Sent: Tuesday, August 18, 2009 9:45 AM
  Subject: [CAUT] lubing ponder


  Gang,
  Pondering......
  Has anyone ever considered pre-treating the pins (action not tuning)prior to repinning? 
  Perhaps just a shot of spray or putting the pin a bath.. CPL/Pro-Tec etc. before inserting. 
  May or may not have benefit for long term. Yes, some bushing is graphite enhanced but most is not.
  Looking forward to discussion pros and cons.  
  Gerry C
  West Chester University of PA
   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20090818/7b212aec/attachment.htm>