Yep, that's where I got the idea, which is a good one. It can be adapted to a lot of other uses as well, using different diameters and thicknesses of pipe, and cutting different sized openings. Clamping keytops, for example. Or back check leather. Regards, Fred Sturm University of New Mexico fssturm at unm.edu On Mar 12, 2009, at 9:10 PM, Jon Page wrote: >> Here are a couple photos to make clear what I was trying to describe >> about creating clamps from a pipe. > > > Here's a photo someone sent to the list a while ago. > -- > > Regards, > > Jon Page<Knuckle clamp1.jpg> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090313/3276b594/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC