[CAUT] Mini square

[reggaepass at aol.com]

price and additional information on the marking jig
Please share this with the list.


Alan Eder





-----Original Message-----
From: Norman Cantrell <normancantrell at sbcglobal.net>
To: caut at ptg.org
Sent: Fri, May 7, 2010 11:00 am
Subject: Re: [CAUT] Mini square




Jim
 
How many do you want?  I had some made up a couple of years ago to add to a booth I was manning at the Central West Seminar in Wichita, Kansas.  I have quite a few left.  I also have a jig that can be used to mark the center line in the hammer molding.  If you are interested you can contact me off list regarding the price and additional information on the marking jig.
 
Regards
 
Norman Cantrell, Registered Piano Technician

--- On Fri, 5/7/10, Jim Busby <jim_busby at byu.edu> wrote:


From: Jim Busby <jim_busby at byu.edu>
Subject: [CAUT] Mini square
To: "caut at ptg.org" <caut at ptg.org>
Date: Friday, May 7, 2010, 12:08 PM



Anyone know where I can get a little square like this? (attached. Old Baldwin.)It’s about 3” x 1.5”.  I use it for hammer hanging and only have one left, which I seem to misplace all too often…

 

Thanks.
 
Jim Busby



 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20100507/eba6dad3/attachment.htm>