[CAUT] Mini square

[Jim Busby]

Thanks Norman. Keith wrote to you for details. I’m very interested in the other jig too, as I draw the center line by eye with a ruler. One cannot have too many jigs!

Best,
Jim busby

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Norman Cantrell
Sent: Friday, May 07, 2010 12:00 PM
To: caut at ptg.org
Subject: Re: [CAUT] Mini square

Jim

How many do you want?  I had some made up a couple of years ago to add to a booth I was manning at the Central West Seminar in Wichita, Kansas.  I have quite a few left.  I also have a jig that can be used to mark the center line in the hammer molding.  If you are interested you can contact me off list regarding the price and additional information on the marking jig.

Regards

Norman Cantrell, Registered Piano Technician

--- On Fri, 5/7/10, Jim Busby <jim_busby at byu.edu> wrote:

From: Jim Busby <jim_busby at byu.edu>
Subject: [CAUT] Mini square
To: "caut at ptg.org" <caut at ptg.org>
Date: Friday, May 7, 2010, 12:08 PM
Anyone know where I can get a little square like this? (attached. Old Baldwin.)It’s about 3” x 1.5”.  I use it for hammer hanging and only have one left, which I seem to misplace all too often…

Thanks.

Jim Busby


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20100507/5f8a8c6d/attachment-0001.htm>