[CAUT] Steinway D Case Repair & Refinishing (Institutional)

Paul Milesi, RPT paul at pmpiano.com
Wed May 12 13:33:52 MDT 2010


List,

As you may recall, I wrote a few months back about the possibility of our
music department finally claiming possession of a 1970 Steinway D which has
been in the Chapel on our campus, and moving it to the Recital Hall within
the Department of Music.  Approval for a move to our Recital Hall has just
been granted!  The piano was a bequest to the School of Music in 1970 from
the former head of piano studies.  The piano was new at the time it was
received, and was placed in the Chapel because there was no recital hall at
that time.  This piano will, hopefully, become our main "recital piano,"
replacing a 15-year-old Yamaha C5.  The D has new hammers, shanks and
flanges one year ago (original reps).  Key bushings were replaced.  Needs
full regulation and voicing, pulley keys fixed, and other things.

For years this D has been stored in a narrow alcove with a metal railing on
one side, and the piano is scraped along it every time it is used.  (SEE
ATTACHED PHTOTOS.)  Don't ask me why...I don't know!  This kind of treatment
is incomprehensible to me.  You can also see that the fallboard is not only
worn, but actually scalloped from finger nails.  Is there a way to "fill"
those scallops, or would you recommend a new fallboard?

Anyway, I'm trying desperately to save this instrument at absolute minimal
cost (we barely came up with moving money).  We would like the piano to be
presentable in terms of visual aesthetic for recitals in our 120-seat
recital hall.  Estimate for refinishing the whole piano was $10-13K, and we
simply don't have the money.  And basically the case is OK, showing some
wear, except for the gross damage you see in the photos.

So here's my question: What are some reasonable options for an acceptable
"fix" of this case?  Should I undertake myself to fill with putty, mask it
off, and spray with a can of lacquer?  I say this somewhat jokingly, but
also know if I did that very carefully, the damage would at least be less
obvious--like a racing stripe, perhaps.  ;)  It will be hard to make it
worse, I think, unless I spread paint or putty on good parts of the case
finish.  I've seen spray paint repair done on some institutional pianos in
hotels, schools and churches, but have always detested that "masking"
approach.  Perhaps now I'll be forced to adopt it myself?  :(

Seriously, what should I do?  We'd like to get this done this summer, while
I work on the action and lyre.  I'm pretty ignorant of what would need to be
done here, wood-wise, other than to somehow "fill" the gouge and then veneer
and refinish, blending with current finish?  I don't know...is "blending"
the finish even possible?  Please help me out with your takes on this.
Remember: I have minimal woodworking experience.  :)

One other consideration: The piano must be moved up 3 flights of stairs --
at considerable expense -- to the Recital Hall, as there is no elevator that
will accommodate it.  I just thought before moving it up there, perhaps it
should go to somebody's shop to have the face fixed, saving another
in-and-out move at a later date.  The one piano refinisher I know gave me
the above quotes, and thought anything less would not be doable, that it's
quite a mess.  I don't know anybody else to do it, although I have a couple
inquiries out.   How do I accomplish an acceptable intermediate solution
over the summer without making a worse mess?  Can this work be done, now or
later, while the piano is on the Recital Hall stage?

Sorry, I got rather long-winded.

Paul Milesi

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Photo_111909_010.jpg
Type: video/x-flv
Size: 360825 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100512/9b12fb74/attachment-0003.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Photo_111909_011.jpg
Type: video/x-flv
Size: 391459 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100512/9b12fb74/attachment-0004.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Photo_111909_012.jpg
Type: video/x-flv
Size: 404047 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100512/9b12fb74/attachment-0005.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P3100214[3].jpg
Type: image/jpeg
Size: 100760 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100512/9b12fb74/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P3100215[3].jpg
Type: image/jpeg
Size: 146565 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100512/9b12fb74/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P3100212[3].jpg
Type: image/jpeg
Size: 112670 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100512/9b12fb74/attachment-0005.jpg>


More information about the CAUT mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC