I thought I read that one of the supply houses was selling the Onesti kit. Or maybe I dreamed it... Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "Donald McKechnie" <dmckech at ithaca.edu> To: caut at ptg.org Sent: Thursday, May 27, 2010 2:53:19 PM GMT -06:00 US/Canada Central Subject: [CAUT] balance hole repair All, I'm interested in finding the tools that Ralph Onesti sold for his balance hole repair system. I have tried contacting Ralph but no luck. I know that he was going out of business so I guess that is the reason I have not had success contacting him. He still has his web site up so one can have a look at the tools for his system: http://www.onestipiano.com/pages/bhrs.html It looks like some sort of speciality plug cutter with bits for the pilot hole. The balance hole seating tool looks like a speciality forstner bit, router bit, end mill? Might anyone have an idea where these tools can be purchased? Thanks, Don Donald McKechnie Piano Technician Ithaca College dmckech at ithaca.edu 607.274.3908 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100527/f5ca4d4c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC