[CAUT] nasty overtone?

[Peter Sumner]

It seems that there is an element within the PTG who either hold or have held high office and advise or have advised etc in various capacities and hold views of a technical nature at odds with manufacturers production and design...shame on them...
This diminishes the credibility of the PTG to such an extent that some manufacturers must just smile and shake their heads.
This is indeed one of the many cases of Emperor's New Clothes...and I know  non of the above will be in the least stirred by my humble comments...but WHY do they get voted into such positions?....I bet they can even see Russia from their houses...

I'm sure all these characters have, like me, tuned, voiced and regulated dozens, even hundreds of fine concert instruments....many times being complimented on the work and the sound of the piano by an artist of note....If only those pianos had been re-engineered, or had non standard hammers...or even weird holes in the soundboard.....of course they would have sounded SO much better..., 

As a solution to the 'nasty overtone' issue...I suggest considering deep shoulder needling, tapping down the termination points, tapping down either side of the duplex bridges, shifting the wires left and right to iron out any ridging in the capo bar, checking the shape of the hammer head, checking if the tri-chord is level, fitting the hammer to the string PROPERLY....
Incidentally, all this work should be done on every note....If done properly, there will be much more focus and power....

I guess I would ask why NY hammers are not being used....but given the amazing lack of respect paid to manufacturers wishes on this forum I guess it is too much to ask...

Let loose the dogs of war.....

P




On May 30, 2010, at 7:53 AM, Kent Swafford wrote:

> Exactly, Mr. Sumner. Heed your own words, please.
> 
> Kent Swafford
> 
> 
> On May 30, 2010, at 9:31 AM, Peter Sumner wrote:
> 
>> I'm sure I'm not the first to tell you that you are entitled to your own opinion but not your own facts.
>