[CAUT] M&H sost question

[Greg Granoff]

Thanks Jon--we won't be attempting removal quite yet, but when the time
comes I'll keep this in mind and may ask to see it if it's no trouble for
you.
Greg

-----Original Message-----
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon
Page
Sent: Monday, September 20, 2010 3:58 AM
To: caut at ptg.org
Subject: Re: [CAUT] M&H sost question

I would remove them first because they are tight. Drill the hole
a little larger to allow the brackets to be screwed deeper without
stress.

I can post a repair I made to a sheered bracket if need be.
-- 

Regards,

Jon Page