Greetings list: I'm very familiar with traveling Steinway parts, but not flat flanges. Are there refinements to traveling them--other than just placing the traveling paper to one side or the other and the proximity to the flange hole? When I removed parts from the hammer rail of an action I'm working on, I noticed that sometimes paper was placed for or aft and not often the entire length of the flange. I understand the different widths of the paper, but not the for and aft placement on flat flanges. Thanks, Barbara Richmond, RPT near Peoria, Illinois -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20110212/1a0a5be9/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC