[CAUT] NY hammers

Bob Maret itunepiano at aol.com
Tue Feb 15 12:57:34 MST 2011


 Here are some measurements from the 1992 D

Bass String height    202-205mm.  Bore is 55mm  Stack is shimmed 3mm here


Treble String height (spec) = 194mm:

Sec 2 string height  = 196-198mm  Bore 48mm  - stack is shimmed 3mm here

Sec 3 string height  =  198-198mm, Bore, 48mm - stack is shimmed 3mm here

Sec 4 string height  =  197-195mm  Bore 48mm  - stack is shimmed 3mm on left side, 1mm on right side

Sec 5 string height =  194-192mm  Bore 48mm - stack is shimmed 1mm on left and nothing on right.

Dip is 11mm,   Blow distance 49mm.   


#1 hammer flange Center pin height  is 147mm,  whip center pin height is 86mm

#88 hammer flange center pin height is 145mm   whip center pin height is 83mm

Bob Maret
UCF





 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20110215/999e9bb2/attachment.htm>


More information about the CAUT mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC