also showing use of extra mass for damper heads. This is the second place I have seen this (the first being in an upright built by Del Fandrich). Alan Eder -----Original Message----- From: Fred Sturm <fssturm at unm.edu> To: caut <caut at ptg.org> Sent: Mon, Jan 24, 2011 4:48 am Subject: Re: [CAUT] Sauter I will echo Alan: Steingraeber should be there. Also, I thought I'd post a couple photos of Sauter's innovation and attention to detail with respect to uprights: an extra spring to assist repetition (Steingraeber has something analogous as well), and their design of upright sostenuto, also showing use of extra mass for damper heads. Regards, Fred Sturm On Jan 24, 2011, at 10:18 AM, Alan Eder wrote: Speaking of forward-looking, long-time German piano makers, is Steingreaber in Groves? Alan Eder -----Original Message----- From: Laurence Libin <lelibin at optonline.net> To: caut ptg <caut at ptg.org> Sent: Sun, Jan 23, 2011 1:30 am Subject: [CAUT] Sauter Thank you all for your advice, a Sauter entry has been drafted. Laurence Libin Editor-in-Chief Grove Dictionary of Musical Instruments Oxford University Press lelibin at optonline.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20110124/c91939f5/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 22419 bytes Desc: not available URL: <http://ptg.org/pipermail/caut.php/attachments/20110124/c91939f5/attachment-0002.jpeg> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 23235 bytes Desc: not available URL: <http://ptg.org/pipermail/caut.php/attachments/20110124/c91939f5/attachment-0003.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC