Paul: Several years ago – before I retired – I had a “B” in a practice room that was literally 25” larger than the piano. Obviously it was too loud. I called Ray Negron at Ronsen and told him what I had and we chatted for a few minutes. I ended up with a set of Bacon felt hammers that he pressed somewhat more lightly than normal and they worked great. While they did come up somewhat over time, it was nothing like any other hammer would have been. When I retired they still sounded good. That’s what I love about the Ronsen hammers. I can call and talk to the guy who is going to press them, explain what I need and get a custom set. dave From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul T Williams Sent: Sunday, March 06, 2011 1:57 PM To: caut at ptg.org Subject: Re: [CAUT] Hammers are felt springs--was Steinway.... Hi Dale, I think I refer to them as Wally's since he developed them with Abel. No Steinway's work at Steinway anymore. Should we start calling the Webbs? (just kidding, of course). Let's give Wally the kudos of getting these on the market. I think Mel is a great lady and is running the Brooks Co wonderfully. She's great!!....and I Love the Naturals! Perhaps we'll just start calling them "Naturals"?? I think Wally needs a bit of recognition though... I think it might be a good idea for all of us to contact hammer producers to develop some sort of a soft (not too much so) hammer designed for just practice rooms and other small teacher studios, etc. I'm wondering if there would be a market for this. I spend a lot of time voicing down practice grands that are played 16 hours a day. No matter what I put on them, they're harsh and painful in just a few months, but built well enough to handle quite a few years of abuse. Sure, these will be overly bright soon enough, but is there a technology to construct such a hammer? This coming from a "green" college tech who knows very little about hammer construction. On the other hand, I don't want to start out with a "mushy" sound that will only get to a nice level in 6 months. These students who play these pianos have futures that are sitting there in our hands to make them work and sound properly, so I think there must be a "happy family" somewhere. We have to keep in mind why we're all here....for the students, mostly. The stage is a totally different issue. Anything to lesson this massive care of practice pianos is all welcome to me. Or, I'll just have to keep the needles in good supply. BTW, I do steam them as a "quick" fix...with a capachino steamer which the students find fascinating to watch! I learned this from Roger Gable about 15 years ago. Nice quick fix. If the hammers are rocks, however, it doesn't really work well and I don't run the steamer over them more than twice. What say you fellow CAUT's?? I'm I out in left field....again :>(??? just trying to learn this crazy caut thing!! Best, Paul From: Dale Erwin <erwinspiano at aol.com> To: caut at ptg.org Date: 03/06/2011 01:19 PM Subject: Re: [CAUT] Hammers are felt springs--was Steinway.... _____ I notice the Abel Neutral hammers often referred to as "Wallys naturals". Now that he's not running the company anymore, why does this persist? Melanie, his very capable daughter is running it, so shouldn't the the hammers be called Melanies Naturals.....naturally? :) AS I read posts like this routinely I am kind of befuddled. So many hammer makers issue us hammers with a hard knot of felt, which is ever present over the top of the molding. This feature characterizes firmer pressing of hammers all over the planet and they tend to be high in maintenance thereby consuming precious school budgets which are.....increasingly scarce. I realize there are many specific situations and reasons why we use a particular type of hammer, including me and I have sometimes chosen poorly. It is a fact that, the technical definition of a piano hammer is a non-linear felt spring (See five lecture on the acoustics of the piano.) Yet primarily many hammers more resemble the consistency of buffing wheels. Or cotton balls filled with lacquer. And we are expected to make them work and hold up? Really? In my opinion there only a few hammers made currently in the world that fit the true model of this description. 2 in this country, 2 in Canada and sometimes by happy accident....China. There may be others elsewhere but I am unaware of them. And there may be some well known brand of pianos where the pendulum is swinging back the other way but am unclear which ones at this moment. For 25 years I have observed with keen interest the hammer wear in institutional settings. Routinely these ahmmers are infected with deafening earsplitting sounds in practice rooms, and breaking strings with in very short periods of time etc. In light of this I ask, should we really embrace the predominate styles of hammer for high use institutional settings, especially practice rooms? There is, without a doubt, in my mind ,that hammers acting as a felt spring have a much greater ability to maintain a musical tone & provide precious voicing stability with out massive amounts of needling or much anything else. The resistance to this idea /reality is especially perplexing and have not heard many support it. Is it possible to over look the pianos in our care that are not being problems in high use situations? Do we ask, why are these hammers holding up and still sounding musical, and others not? hmmm. Considering the problematic nature of hot/ hard pressed hammers in high use situations, does it not make sense to consider a different hammer choice and experience this for oneself? Professionally speaking , I am tonally and musically driven and value both my hearing and the music as you all do. I value the same for the students and teachers I serve and it is why I take the risk to state this premise clearly and passionately. The fact that I possess a bias is not for nothing and not because I am involved deeply with the Ronsen hammer brand. It is primarily for the reasons outlined in this post....and..... I Love music Regards Dale Erwin-Heritic at large www.Erwinspiano.com -----Original Message----- From: Paul T Williams <pwilliams4 at unlnotes.unl.edu> To: caut at ptg.org Sent: Thu, Mar 3, 2011 1:52 pm Subject: Re: [CAUT] Fwd: Steinway sound-Hammer weights Hi Dave, You're exactly right! No matter what hammers are on those pianos, they get bright....and very quickly! 2 of 5 piano faculty have 2 B's each; one has 2 M's, one an L, and the other has her own personal Yam c-7. It would be a nearly full time job to keep them in great tune, regulation, and voiced properly. The yam is the yam and since it's hers, can do very little. The M's are nice and not played hard, the L is likewise not pounded on, but played regularly and has Abel Naturals on. It's the 4 B's that need constant attention! One prof is an extremely hard player with likewise hard playing students, so I'm fixing broken strings about every 6 weeks. Mostly this happens in the capo, but the Sty with the Sty hammers has busted 4 bass strings in 2 years. His pianos have a set of regular Sty hammers and the other has a set of Wallys Naturals. Both break strings about the same. The other prof has NY hammers on both, but not as hard a player. I rarely fix broken strings there. I try to watch the regulation closely as I can, but I fear if I back off the let off and drop, they'll complain that pp or ppp is impossible to control. They are bright! I'll voice them down, but it only lasts a couple months. I can see how that would tire the poor prof, but what can we do? Good input! On to fight another day.. Paul From: "David M. Porritt" < <mailto:dmporritt at gmail.com> dmporritt at gmail.com> To: < <mailto:caut at ptg.org> caut at ptg.org> Date: 03/03/2011 02:06 PM Subject: Re: [CAUT] Fwd: Steinway sound-Hammer weights _____ When I was working at SMU the piano teachers with a full load of students didn't want a loud and boisterous piano in their studio (all had 2 "B"s except one teacher who had to "D"s). As one piano teacher with 55 years of experience there stated: "...you can't listen to 4 or 5 hours of a bright piano. The cochlea will fatigue and you will miss subtle things." I think he is absolutely correct. dave -----Original Message----- From: <mailto:caut-bounces at ptg.org> caut-bounces at ptg.org [ <mailto:caut-bounces at ptg.org> mailto:caut-bounces at ptg.org] On Behalf Of David Love Sent: Thursday, March 03, 2011 10:49 AM To: <mailto:caut at ptg.org> caut at ptg.org Subject: Re: [CAUT] Fwd: Steinway sound-Hammer weights I agree about the concert hall in most situations although I do have a piano that I work on in a small concert hall in which I worked closely with a committee of pianists to select hammer and voice for the piano as they wanted it when I was rebuilding the action for them (Steinway B). The group of 5 or 6 professional pianists and teachers ended up choosing a Wurzen felt hammer (Ronsen), a comparatively soft pressing when compared with the more typical lacquered up hammer or a Renner performance type hammer, and with the exception of the top two octaves received no hardeners, and even then a very light application. The piano sits next to a 30 year old Bosendorfer 228 which produces somewhat more power and the complaints I get (not too many :-)) are never about the Steinway being too soft but do happen with the Bosendorfer being too loud and bright and I've voiced it down some to please the even below where I would prefer to hear it. The hall is rather live though. Just one example. Personally, I find that Steinway a bit dark (and I probably lean toward warmer and slightly darker as my own personal taste) so that might tell you something at least about this one situation and this group of pianists, FWIW. I find that with the professional pianists that I work with (and there are quite a few) brighter is rarely the choice for their practice pianos. Most want a pretty round and warm sound, clear and not muffled, but not what I would consider bright. Softer hammers have often been the choice here (though not on a D necessarily, but most I know don't practice on D's). They seem to have no trouble extrapolating to the concert hall but for day in and day out practicing they want something more pleasing even erring on darker over brighter. Not always true, of course. Many of the professors whose pianos I keep at Stanford prefer the pianos brighter, but not all. Perhaps that's because they are going back and forth between their studios and the stage pianos more often. Outside of that setting, however, with most of the professional pianists that I work with I would say that I'm generally asked to bring things down far below the level of where you would expect a concert stage piano to be. I do find that serious piano students (on the other hand), especially those on the ascent, often prefer brighter. I don't want to delve into my own theory about what that psychology might be but I do see a trend coming out of one, in particular, well known East Coast music school that seems to value power and brashness over nuance and depth. Standards get set in all kinds of ways. David Love www.davidlovepianos.com The softer hammer may make some customers very, very happy, but I don't think it works in the concert hall, or in the professional pianist's studio (or as the serious student's practice instrument). Perhaps there are exceptions, and if so I'd like to hear about them. Regards, Fred Sturm <mailto:fssturm at unm.edu> fssturm at unm.edu “Art is not a mirror held up to reality, but a hammer with which to shape it.” Brecht -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/caut.php/attachments/20110306/0078d1a5/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC