>I have not been very successful in finding a convenient source for >soundboard stock for the fortepianos I build. These are thinner than >modern piano soundboards (about 1/8") and I have a prejudice against >Sitka. Engelmann was suggested but I haven't found anywhere with a Have you tried Posey in Hoquiam, WA? They supply spruce for pianos, guitars, harps or anything you would like. You can specify grain pitch and everything. Their address is PO Box 418, Hoquiam WA, 98550 and their fax number is 206-553-2402. Andy Johnson (president) is who I've talked to in the past. I could check around and see what the sources are around here. I do know one of the guys here put a sb into a Steinway B last year and got the wood from the east somewhere. The stock for Chris Gregg's Steinway A came from a supplier here who specializes in supplying spruce for gliders and light aircraft. If you like I could find out the addresses. John John Musselwhite, RPT Calgary, Alberta Canada musselj@cadvision.com john.muselwhite@67.cambo.cuug.ab.ca
This PTG archive page provided courtesy of Moy Piano Service, LLC