Fred T. contributed these 2 pet peeves: Let's make a big list;) >I have two pet peeves, and perhaps there is someone out there who can resolve them for me: >1. Rebuilders who erase the serial number on the plate >2. Manufacturers who run an extra length of wire through the becket and then bend it around the pin. It makes string replacement so much fun. Here's one on mine: 3. Manufacturers who assemble case parts using Phillips head screws made of solder and Playdough, driving them in with pneumatic screw guns till they're buried in the wood.(Usually without pre-drilling) They are next to impossible to get out. Hey,you guys..... STOP THAT!! Paul Dempsey Marshall University wippen@aol.com
This PTG archive page provided courtesy of Moy Piano Service, LLC