There is a screw loose some where, as in the lift lever flange or the damper wire screw, or what do you call the thing the d wire screw threads thru. Of course the damper stop rail is adjusted, and all of the screws are very tight especially the one above the offending damper. Richard Moody ps Flange screws may feel snug, but they may also be at the bottom of the pilot hole. ---------- > From: Antares <antares@euronet.nl> > To: pianotech@byu.edu > Subject: Re: a Baldwin damper noise > Date: Wednesday, April 02, 1997 10:16 AM > > >I'm going back within a week or so, to try again. (Never say die.) I'd love > >to have something new to try or look for! > How about the lead in the lever (if there is any)?
This PTG archive page provided courtesy of Moy Piano Service, LLC