>Your reason to hestitate to ream these tapered holes is well justified, >Sam. I'd verify the original tuning pins and see if they weren't tapered >as well... > >...It allows setting the pins ever so slightly to increase frictional >holding power. To ream these tapered holes removes that feature >permanently. > >Keith A. McGavern List, Instead of setting the pins, tapping or driving the pins further into the pinblock would be the accurate description. =DDhank you, Keith A. McGavern kam544@ionet.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild Oklahoma Baptist University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC