>My wish list for the SAT: > >1> Be able to read the Header which contains the piano, ser. #, customer >name or whatever is there. > >2> A visible indication of what mode the SAT is in - i.e. Tune, Memory, >Stretch, etc. > >3> The note and/or the partial being measured. > >4> I'd like to be able to read the FAC numbers for a stored tuning. > >and if we're getting real wild, as you suggest, multiple partial displays >at once. Of course that can be done now, just buy multiple SAT's and >parallel the foot/thumb switch to all of them. > > Del > >Del Gittinger, RPT Yup, all available now in CyberTuner. As for the multiple partial thing: This would be a bit complicated, but right now with CyberTuner and a MIDI SAT, one could tune a piano and have displays for two different partials of many notes of a piano. With RCT, one has a choice of partials from which to tune, at least on notes A0 through G#4. So one could calculate a tuning with one set of partials for use in the CyberTuner display, and calculate a tuning using different partials to be sent through MIDI to the SAT. Available today. Kent
This PTG archive page provided courtesy of Moy Piano Service, LLC