-----Original Message----- From: CCLPianos@aol.com <CCLPianos@aol.com> To: pianotech@ptg.org <pianotech@ptg.org> Date: Wednesday, October 22, 1997 2:39 AM Subject: Re: Re: Pinblock >Hi, >I've noticed that a lot of the comments included the use of CA glue to help >tighten the tuning pins. I've had great success with this treatment, but only >on pinblocks that don't have tuning pin bushings. >Pat Wethington > On a grand, you could flip it over (if the holes are drilled all the way through). Some say the glue goes beyond the bushings but I can't help thinking that the bushings are stopping enough glue from getting where it is needed to diminish the benefit of the procedure. Glenn.
This PTG archive page provided courtesy of Moy Piano Service, LLC