Don't forget, to replace the jack springs and check the support posts ! Jon Page At 09:00 AM 10/30/97 +0000, you wrote: >Bill, >Thanks for the input. Unfortunately, the owner isn't willing to spend >the money for a complete overhaul of the action, so I'm only fixing the >most egregious problems (few broken hammer springs/jack springs). I am >replacing all balance and front rail punchings, the hammer rest rail >pads and the hammer rest rail cloth. And of course the bridle straps. > >So, the longer blow distance does make sense. > >Thanks to all others who have commented. >====================================================================== > > >Billbrpt@aol.com wrote: >> >> On getting an Old Upright to play well again: ><snipped lots of good stuff to save bytes> >> Hope this helps you. >> Bill Bremmer RPT >> Madison, Wisconsin > >
This PTG archive page provided courtesy of Moy Piano Service, LLC