Hi Richard: The next time you rebuild a Grand, while the strings are off, hit the soundboard with a tympani mallet or even your fist. You will hear a resonant frequency around A1, B1 or C2. A large grand may have a resonant freq. as low as F#1 or maybe even lower. My Steinway L has a resonant freq. at B1 with the strings on and up to pitch. When I worked at Baldwin, I would go around at night and give a fist test to all the pianos in 1st belly station. That's where the soundboards have just been glued in. The Concert grands had lower resonant freqs. than the small M's did. After stringing, the freq. is a little higher due to the loading and added stiffness. Jim Coleman, Sr. On Thu, 20 Aug 1998, Richard Moody wrote: > > ---------- > > From: Delwin D Fandrich <pianobuilders@olynet.com> > > To: pianotech@ptg.org > > Subject: Re: Inharmonicity - so what? > > Date: Wednesday, August 19, 1998 1:54 AM > > > >If the fundamental resonant frequency of the string loaded >soundboard > assembly > > How is this freq determined? > Ric > >
This PTG archive page provided courtesy of Moy Piano Service, LLC