I'd like a consensus from the group, if you please. Piano: Steinway 'B' circa 1975; Teflon, various other, ah, "acceleration" features Mission: Routine action/tone regulation; internal cleaning/cosmetics package Objective: To be completed in time for an in-home but nonetheless serious chamber music event featuring guest artists. (For the un-initiated, chamber music means they bring their own fifes and fiddles, and that the Steinway must pretend it's some other brand and not compete for available acoustic space). Existing customer complaints: None Existing technician (that would be me) complaints: Several small things. Also don't like the way the action feels, but will save those sentiments until some routine procedures have been completed. Related other: I confess to working on much older S&S units than this, and frankly don't know what is 'factory' for this vintage. Customer is second owner, but everything looks like I'm the first to pop the hood. Since I started in the usual place (for me), i.e, keyframe/keys, I'll confine my comments to this area for now. I'm accustomed to rebushing keys as part of an action reconditioning after this number of years. This instrument has had very low usage, despite the age, and my usual indicators for rebushing just aren't there. In other words, everything is within specification and tolerance. That's the good part. The rest of the story: a. the existing bushings contain [dry] graphite only in the bushing to pin contact area. This "coating" is so uniform and symmetrical inside the mortices that it appears to be factory, but I can't imagine how (or why) it was done; b. I don't like graphite, wet or dry, on key bushings; c. from an aesthetics (only) standpoint, the bushings leave a lot to be desired. Question 1: Is the graphite a stock condition? Question 2: Does this vintage have unusually ugly key bushing work? It looks strangely familiar -- like something that would come from the Pratt-Read Clemson division. To bush or not to bush... that is the immediate question, at least until something else comes up! <g> Oh yes, almost forgot. Let's not consider cleaning the graphite as a viable option. I think the results would be worse than the existing condition. Speaking of worse, it'll be my luck that if I do rebush, I'll find the white thermo-nuclear activated adhesive glop holding the bushings in place. Thanks in advance for your collective wisdom and opinions! Jim Harvey, RPT ___________________ "Windows-95 is a 32 bit extension and graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company, that can't stand 1 bit of competition." [Author unknown, but wish it had been me -jh-]
This PTG archive page provided courtesy of Moy Piano Service, LLC