Del: Have you looked at any of the information on the Wapin bridge? dave Delwin D Fandrich wrote: > Alan W Deverell wrote: > > > Wayne Stuart has done this - a agreffe styled device replacing the > > conventional bridge pin - now used on all his grands. > > > > http://www.newcastle.edu.au/department/fmu/stuart1.html > > ---------------------------------------- > > Many builders have done this over the years. Sohmer and Hallet & Davis come > quickly to mind -- I don't know if it has been done in European pianos. Most of > these devices also have problems. For one, they are notoriously hard on > bridges. The only one I've encountered so far that has survived intact for some > years has been one of the Sohmer designs. That one worked quite well but must > have been quite difficult to build. (It required some fairly complicated bridge > work aft of the agraffe.) > > I would like to know more about the device used in the Stuart piano. The > photographs in Mr Stuart's web site do not have enough detail to be very > informative. > > I have worked on such devices on and off for some years. So far I haven't come > up with anything I've been overly happy with, but I dislike the traditional > bridge pin arrangement enough to keep trying. If Mr Stuart's device works well > and proves to be viable (i.e., reliable) over the long haul, my hat is off to > him. > > Regards, > > Del -- _______________________________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, Texas _______________________________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC