-----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org] On Behalf Of Ron Nossaman Sent: Saturday, August 29, 1998 9:02 AM To: pianotech@ptg.org Subject: RE: pianotech-digest V1997 #1056 > >I suggest a watanabe tip from Pianotek, the tip is threaded to 3/8" by 30 >threads per inch, which is pretty much standard in the industry for tips. >It costs me far too much to import tips only to export them again. When you >can just order them for yourself. >MIke > Not 1/8" pipe thread (tapered)? Ron The shaft and ball have a 1/8 NPT..... The tip is 3/8" 30 TPI Mike
This PTG archive page provided courtesy of Moy Piano Service, LLC