Hi John, Why bother to tackle it? If the lowest notes do get stuck, alittle careful work with a coping sawblade or a fine jigsaw blade in a vice grip should solve that. As for the cheek block and key slip, it's sad they're permanently on, but since it's not a grand, I'd just live with it. -Mike Jorgensen John R Fortiner wrote: > > Just thought you could cry with me about this one. I looked at an > Everett console piano a couple of days ago that had a damaged leg - so I > was told by the customer. Well------ the damage went way beyond the leg > as the real problem was that the bottom of the key bed that the leg was > mounted to was fractured. Some previous owner had tried to fix this with > a generous application of Elmers (white btw). The story doesn't stop > there as in the process of gluing the key bed the squeeze out also > managed to get on the tops of low A and B ( fortunately they still play > ). AND the same squeeze out proceeded not only to these keys and the > split bed, but also to the key slip and to the cheek block on that side > of the piano, none of which are currently removable without some serious > work alongs the lines of glue line breaking. Any thoughts as to how to > tackle this??? (I have considered a match and about a gallon of gas or > its equivalent.) > > John Fortiner > > pianoserv440@juno.com > > _____________________________________________________________________ > You don't need to buy Internet access to use free Internet e-mail. > Get completely free e-mail from Juno at http://www.juno.com > Or call Juno at (800) 654-JUNO [654-5866]
This PTG archive page provided courtesy of Moy Piano Service, LLC