Hammer tails were hitting the flanges on release? Solution: remove material from flanges for tail clearance OR shorten tails :-) Jon Page At 09:28 AM 6/19/98 +0000, you wrote: >Dear List, > >Puzzler... > >Feurich Grand, 6'6". Customer complains of clatter when >playing. He demonstrated by just pushing a handful of keys down >a bit and releasing them and what a noise. The noise from key >release was very noisy, well beyond what we might live with. I >pulled the action and didn't find anything in the piano like >pencils etc. The former dealer tuner, who had been taking care >of the piano since the sale of a few years before, had not been >able to fix the problem and in desperation had moved up the >hammer rest rail so the the hammers were resting on the rail. I >moved the rail down and checked the blow distance...that was OK. >No difference in the clatter. I was stumped until I noticed >something with the hammer, shanks & flanges up. >Any ideas about what I had to do to fix the problem... > > > >David Ilvedson, RPT >Pacifica, CA >ilvey@jps.net > >
This PTG archive page provided courtesy of Moy Piano Service, LLC