"Nitro on Plates"

[Jim Coleman, Sr.]

Hi Dale:

Lots of people have used lacquer for a long time. You can buy the various
bronze powders and mix to your own preference. It is best to mix the powder
in the lacquer thinner first so that it does end up in clumps of material
in the spray gun. 

Jim Coleman, Sr.


On Sat, 20 Jun 1998 Daleboy@aol.com wrote:

> Dear List,
>            Do any of you folks use Nitrocellulos Lacquer on Plates when
> refinishing them. Have used mostly Acrylic on them so far...Nitro on the case.
> Sure would make things easier if one Lac shoots all. Thanks!
> Dale Whitehead, RPT
> Franklin Piano Restorations
> Franklin TN
>