sanding block

[Don]

Hi,

Try Chris Gregg,cgregg@huey.cadvision.com (this may be an old email addy)


At 04:38 PM 6/28/98 -0600, you wrote:
>List,
>Does anyone know the name and address of the maker of the voicing sanding
>block?
>It has four different sides so one can sand the center string , outer
>string , two strings  or all so that the hammer is level to the strings.
>Thanks Joe Goss
>You know your on the level if your bubble is in the middle.
>
>
Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.
"Tuner for the Centre of the Arts"
drose@dlcwest.com
http://www.dlcwest.com/~drose/
3004 Grant Rd.
REGINA, SK
S4S 5G7
306-352-3620 or 1-888-29t-uner