Wegman grand info needed

[Joe & Penny Goss]

----------
> From: MPT <MPT@talklist.com>
> To: Joe & Penny Goss <imatunr@primenet.com>
> Subject: Re: Wegman grand info needed
> Date: Wednesday, October 07, 1998 5:48 PM
> 
> >Richard, 
> >Be sure to check and see if there is a pin block in this piano!!!!!!!!  
> No
> >kidding if my memory serves me correctly the pins are only about 1 1/4 "
> >long and are held in a cast iron plate by friction. They are something 
> else
> >to tune as you need to think of the friction vectors of the tuning pin. 
> >Joe Goss
> >
> >
> >
> >> > Dear list. 
> >> > 	A lady called me and said her pins were loose and could I fix them.
 
>  
> >I
> >> > listened over the phone as she played some notes, and I agreed that
> >indeed
> >> > she had some loose tuning pins. So I suggested that if her Wegman
was
> >the
> >> > quality deserving tuning pin tightner, I could probably work
wonders.

Richard hope this will reach you before you meet up with the beast.
Joe